16 Channel HDMI 3G SDI Encoder For High Definition Video Signal
16 Channel 3G-SDI Encoder
Product overview:
The H.264/H.265 Encoder is a hardware device used for high-definition video signal (720P / 1080P, etc.) encoding and network transmission,
using the latest and high-efficient HD digital video compression technology H.264/H.265, with the characteristics of reliable, high-definition, low bitrate and low latency. Input the HDMI/SDI/VGA high-definition video signal to conduct the encoding process, after compression processing
of DSP chip, output the standard TS network stream, the launch of product fills the gap in this industry, which is a direct replacement for the traditional capture card or software coding method, using hard-coded, the system is more stable, and image quality is more perfect,
which can be used in a wide variety of needs for high-definition video and high-resolution and high frame rate acquisition-based IP network transmission, its powerful scalability makes it more easier to respond to the needs of different industries and can be used as live video encoder. Industrial controlled, precision design, small size, easy installation, the power is less than 5W, which is more energy and more stable.
Product features:
*** High-performance hardware encoding.
***Support H.265 video coding efficiency.
***Support H.264 BP/MP/HP.
***Support AAC / G.711 Advanced Audio Coding format quality.
***CBR / VBR rate: 16Kbps ~ 12Mbps.
***1000M network interface uses full duplex mode.
***Mainstream and secondary stream can be pushed to different server.
***Supports up to 720P, 1080P @ 60HZ HD video input.
***Support image parameter settings.
***Support HDCP protocol and Blu-ray.
***Support HTTP, UTP, RTSP, RTMP, RTP, ONVIF protocol.
***The mainstream and side stream use the different network protocol for transmission.
***WEB interface, English and Chinese is optional for configuration interface.
***WEB interface management authority.
***Support remote management in WAN(WEB).
***Support resolution customized settings.
***Support one key to restore the factory configuration.
***Support SDK , secondary development.
WIFI Setting :
Set up the user name of the wireless router
Set up the password of the wireless router, pay attention to choose the encryption type: WPA-PSK.
4. HD wireless Encoder settings
Connect the HD Encoders by the network cable, then open the IE to enter the network setting interface. Settings as shown below:
Note:
1) Default IP of wifi is 192.168.0.32 . When wifi connected successfully, then you can access to the web control panel by 192.168.0.32 .
2) Wifi Encryption : WPA/WPA2 (Note: Some wireless routers have different encryption mode, please select WPA/WPA2 of the encryption )
3) Input the password of the wireless router .
Your message must be between 20-3,000 characters!
